PARD Night Stalker 4K User Manual

Introduction

Please read this manual carefully before using the product to ensure correct and safe operation.
The manual contains step-by-step instructions for installation, functions and maintenance.

Important precautions

• Remove the insulating tape from the battery before using the product for the first time.

• Only use fully charged 18650 lithium-ion battery (3.7V) .

• Turn off and remove the battery if the device will not be used for more than 10 days.

• Avoid pointing the lens at the sun or strong light sources. This may damage the sensor.

• Keep the lenses clean and free from dust, oil and moisture.

• Always use the lens cap during transport or storage.

• Do not disassemble the unit – contact PARD After-Sales Service in case of failure.

• Store the product in a dry, ventilated environment (−20°C to +50°C).

• Use only original PARD components and chargers.

• Export of PARD night vision and thermal imaging devices requires a license.

Package contents

Product description and key features

Night Stalker 4K is a digital day/night riflescope developed for high-resolution image reproduction in both daylight and darkness.
The advanced 4K CMOS sensor (3840×2160) delivers crystal-clear images with true-to-life colors in daylight and detailed night vision using IR illumination.

The built-in Ballistic Calculator system and Laser Range Finder (LRF) (up to 1200m) enable precise distance and shot calculations directly in the sight.
Night Stalker 4K also has Recoil Resistance of 6000J , IP67 waterproofing and wireless WiFi connection via the PardVision2 App .

Main features

• 4K UHD (3840×2160) CMOS sensor

• 1920×1080 OLED display

• Built-in LRF and Ballistic Calculator

• Recoil-activated recording

• WiFi connection (PardVision2 App)

• IR Illuminator (850/940nm) with adjustable brightness

• IP67 water and dust protection

• 6000J recoil resistance

• Gyroscope and E-compass

• PIP (Picture-in-Picture) and automatic recording

Specifications

Components

1. Objective Lens

2. Focus ring

3. IR Illuminator

4. LRF (Laser Range Finder)

5. Power/Sleep button

6. Keypad

7. Diopter adjustment

8. HDMI port

9. Type-C port

10. Micro SD slot

11. Weaver/Picatinny mount

12. Eyecup

Installation and preparation

1. Battery mounting

1. Unscrew the battery cover counterclockwise.

2. Remove the insulating tape from the battery.

3. Insert the battery with the + pole facing inwards and screw the cover on.

4. Turn on the device by holding the Power button for 3 seconds.

5. The PARD logo appears on the screen.

Note: Use only original 18650 batteries. Avoid high heat, moisture and mechanical shock.

2. Assembly

1. Attach the mount to a Weaver/Picatinny rail .

2. Tighten the screws with the Allen key.

3. Adjust eye relief (approximately 45 mm) for comfortable viewing.

4. Check that the image is centered and focused.

3. Focusing

• Use the diopter ring to sharpen text and symbols.

• Then turn the focus ring until the image of the target is clear.

4. E-compass calibration

Move the device in a figure-8 motion until the indicator shows full calibration.

5. Zeroing (insertion)

1. Set up the target board at the desired distance.

2. Press [Key 4] to open the menu and select Zeroing .

3. Shoot and adjust X/Y via the control keys so that the crosshair hits the shot point.

4. Save the profile (A–E) under Save:Y .

Operation and functions

Control buttons

Main menu

1. Display Brightness – Adjust the screen brightness (level 1–7).

2. IR Brightness – Select IR intensity (level 1–3).

3. Scene Mode – City , Rain or Forest for optimal contrast.

4. Ballistic Calculator – Set bullet weight, velocity, aiming height, and environmental data.

5. Gyroscope – Shows tilt and direction.

6. Auto Recording – Automatically starts recording upon recoil.

7. Loop Recording – Continuous video recording (1–10 min clips).

8. Record Audio – Turn audio recording on/off.

9. WiFi – Activate connection via PardVision2 .

10. Language – Change menu language.

11. Date/Time – Set the time format and date.

12. Format SD – Erase all content on the card.

13. Default Setting – Restore factory settings.

14. Version Info – Show software version.

WiFi and PardVision2

1. Download the PardVision2 App from the App Store / Google Play.

2. Enable WiFi on both the device and your smartphone.

3. Find the network “PARD_xxxxxx” and use the password 12345678 .

4. Open the app for live viewing, file transfer and recording.

Ballistic Calculator

1. Select Ballistic Mode from the menu.

2. Set data: bullet weight, speed, aiming height, temperature, air pressure.

3. Use LRF to measure target distance.

4. The device automatically calculates the POI (Point of Impact) and adjusts the crosshairs.

Recoil-activated Recording

When this feature is enabled, video recording automatically starts upon recoil and saves the sequence to the SD card.

PIP (Picture-in-Picture)

Displays a 2× magnified image at the top of the screen for better precision without losing sight of your surroundings.

Maintenance

• Clean lenses carefully with a microfiber cloth.

• Avoid moisture, dust and extreme temperatures.

• Use lens cap when transporting.

• Charge the battery regularly, but avoid overcharging.

• Contact PARD support for technical problems – never open the device yourself.

FCC warning

This product complies with FCC Part 15 .
Unauthorized changes may result in loss of right of use.
This product may not cause harmful interference and must accept any signals received.

Translated and quality assured by Nieload