🔄 How to update
-
Find the right firmware
-
On this page you choose the correct software for your PARD.
-
-
Prepare the SD card
-
Use a microSD card (preferably ≤ 32 GB, FAT32 formatted).
-
Copy the firmware file directly into the card's root folder (not into a subfolder).
-
-
Insert the SD card into the binoculars
-
Turn off the device.
-
Insert the card into the device.
-
-
Start the update
-
Turn on the binoculars.
-
It will automatically detect the firmware file and start the update process.
-
The screen shows a status/progress bar.
-
-
Wait until it is finished.
-
Do not turn off the device during the update!
-
When finished, the device will restart automatically.
-
-
Check the version
-
Go to menu → “System info” or “About” to see the new firmware version.
-
-
Delete the firmware file
-
To avoid accidental re-updates, you should delete the firmware file from the SD card afterwards.
-
⚠️ Tips & Warnings
-
Always use the correct firmware for your model – otherwise the binoculars may become unusable.
-
Make sure the battery is fully charged or use external power via USB-C during the update.
-
If necessary, make a backup of your settings, as the update may reset them.