PARD NV007SP / NV007SP-LRF User Manual

Introduction

This manual describes the correct use, safety and maintenance of the product. Please read it carefully before using the device.

Safety and important precautions

  • Remove the insulation tape from the battery before first use.

  • Only use a fully charged 18650 lithium-ion battery (3.7V) .

  • Remove the battery if the device will not be used for more than 10 days.

  • Never point the lens directly at the sun or other strong light sources.

  • Avoid moisture, dust and high temperatures during storage and use.

  • Turn off the device before replacing the battery.

  • Use only original PARD accessories, cables and chargers.

  • Do not disassemble the unit — contact PARD Service Center if problems occur.

  • All PARD night vision and thermal imaging devices require an export permit when exported outside the EU.

Package contents

Contents Number
NV007SP / NV007SP-LRF Digital Night Vision Device 1
Adapter 1
Type-C cable 1
Allen keys 2
18650 Li-ion battery 1
O-rings and insulating tape 1 set
User manual 1
Warranty card 1

Product description

The NV007SP series is a digital night vision clip-on system designed for quick mounting on the eyepiece of binoculars.
It uses a 2K CMOS sensor (2560×1440) and an OLED display (1024×768) , which delivers sharp images both day and night.

The LRF (Laser Range Finder) model measures distances up to 1200 meters , and together with the built-in Ballistic Calculator, it makes the product suitable for precision shooting and observation.

The NV007SP is constructed of aluminum, has IP67 certification , and withstands recoil up to 6000J .
The compact design makes it ideal for use in the field, and it can be mounted or removed in seconds without affecting your sight.

Key features

  • CMOS 2K sensor with VLEA (Visible Light Enhancement Algorithm)

  • Built-in LRF (Laser Range Finder) with up to 1200m range (SP-LRF model)

  • OLED display 1024×768 with high contrast and low power consumption

  • WiFi and PardVision App for wireless control and image transfer

  • IR Illuminator (850nm or 940nm) with three strength levels

  • Recoil resistance 6000J – withstands recoil from large calibers

  • IP67 water and dust resistance

  • Compact, shockproof aluminum design

Specifications

Parameters NV007SP NV007SP-LRF
Sensor CMOS 2560×1440 CMOS 2560×1440
Display OLED 1024×768 OLED 1024×768
Objective 16mm 16mm
Optical magnification 4x 4x
Digital zoom 1–3.5x 1–3.5x
Diopter adjustment ±5D ±5D
Eye distance 25mm 25mm
IR Illuminator 850nm/940nm (3 levels) 850nm/940nm (3 levels)
LRF range – 1200m
Battery 18650 Li-ion 3.7V 18650 Li-ion 3.7V
Operating time ≤8 hours ≤8 hours
Material Aluminum Aluminum
WiFi Yes Yes
Protection class IP67 IP67
Recoil resistance 6000J 6000J
App PardVision PardVision

Component overview

  1. Objective lens

  2. Focus ring

  3. Power/Sleep button

  4. IR illuminator

  5. Diopter ring

  6. Display (OLED)

  7. Battery cover

  8. Keypad

  9. LRF (only on NV007SP-LRF)

  10. Micro SD slot

  11. Type-C port

  12. HDMI port

User manual

1. Installation and battery mounting

  1. Unscrew the battery cover counterclockwise.

  2. Remove the insulating tape and insert the battery with the + pole facing inwards .

  3. Tighten the cover and turn on the device by holding the Power button for 3 seconds.

  4. The PARD logo appears on the screen.

Note: Use only one 18650 battery. Avoid charging unattended. Do not damage, puncture, or expose the battery to high heat.

2. Adapter mounting

  1. Mount the adapter onto the eyepiece of your binoculars.

  2. Adjust the position so that the image on the display is centered.

  3. Secure the adapter with the locking screw.

  4. The device can now be turned on and used directly as a clip-on.

3. Focusing

  • Use the diopter ring to sharpen text and symbols on the screen.

  • Then use the focus ring to adjust the lens focus so that the target is clearly visible.

Controls and functions

Button Function (short press) Function (long press)
Key 1 Menu up / adjust –
Key 2 Change color mode (Color/B&W) –
Key 3 Take photo / start-stop video –
Key 4 Open/close menu Play recordings
Key 5 Zoom / scroll down Turn WiFi on/off
Key 6 (Power) Sleep / wake up Turn device on/off

4. Menu and settings

  1. Reticle Center Adjustment – ​​center the image so that it aligns with the reticle.

  2. Display Brightness – adjust the screen brightness (level 1–7).

  3. IR Brightness – select the strength of the IR illuminator (1–3).

  4. Scene Mode – choose City , Rain or Forest for optimal contrast.

  5. Loop Recording – continuous video recording in clips (1–10 min).

  6. Auto Recording – automatically start recording when turned on.

  7. Record Audio – turn audio recording on/off.

  8. WiFi – enable wireless connection via PardVision App .

  9. Date/Time – set the time and date.

  10. Language – select menu language.

  11. Format SD – erase all content on the SD card.

  12. Default Settings – restore factory settings.

  13. Version Info – show firmware version.

5. WiFi and PardVision App

  1. Download the PardVision App from the App Store or Google Play.

  2. Turn on WiFi on both the NV007SP and your smartphone.

  3. Find the network “PARD_xxxxxx” and enter the password 12345678 .

  4. Open the app to watch live view, download videos, and control the device.

6. Maintenance

  • Always use the lens cap during transport.

  • Clean lenses with a microfiber cloth.

  • Avoid water, dust and extreme temperatures.

  • Store the battery separately when not in use for a long period of time.

  • Contact Nieload support for repair — never open the device yourself.

7. FCC Warning

The device complies with FCC Part 15 .
This device may not cause harmful interference and must accept any interference received.
Unauthorized changes may result in loss of use rights.

Translated and quality assured by Nieload