PARD NV008SP / NV008SP-LRF User Manual

Introduction

Please read this manual carefully before using the device to ensure proper and safe operation.
The manual describes step-by-step use, adjustment and maintenance of your night vision scope.

Important precautions

• Remove the insulation tape from the battery before using the product for the first time.

• Only use a fully charged 18650 lithium-ion battery (3.7V) .

• Remove the battery if the device will not be used for more than 10 days.

• Always store the device and battery dry and safe.

• Avoid pointing the lens directly at the sun, welding, or other strong light sources – this can damage the sensor.

• Use the lens cap when the device is not in use.

• Store the product in a cool and ventilated place (−20°C to +50°C).

• Do not attempt to disassemble the unit – contact PARD After-Sales Service in case of problems.

• All PARD night vision and thermal imaging devices require an export permit upon export.

Package contents

Product description and key features

The NV008SP-LRF is an advanced digital night vision scope with a 4MP (2688×1520) CMOS sensor , which provides sharp images and high levels of detail even in very low lighting.
The integrated LRF (Laser Range Finder) measures distances up to 1000m/1200yds and works with the built-in Ballistic Calculator for precise shots.

The compact design, 6000J recoil resistance and IP67 protection make the device robust and reliable for hunting in all environments.
The built-in WiFi connection via the PardVision App enables wireless control, live view and transfer of recordings.

Key features

• Ultra-sensitive CMOS 2688×1520 sensor

• AMOLED 1280×960 high contrast display

• Built-in LRF and Ballistic Calculator

• Recoil-activated Recording

• VLEA (Visible Light Enhancement Algorithm)

• IR Illuminator (850/940nm) with range up to 350m

• WiFi connection via PardVision

• IP67 waterproof and 6000J recoil resistance

Specifications

Components

1. Lens cap

2. Lens focus ring

3. Keypad

4. Diopter focus ring

5. LRF module (LRF version only)

6. LRF transmitter

7. LRF receiver

8. Objective

9. IR Illuminator

10. Battery cover

11. Power/Sleep button

12. Power indicator

13. TF card slot

14. Type-C port

15. HDMI port

Installation

1. Unpacking

• Carefully remove the device from the packaging.

• Check that all parts are intact and correspond to the packing list.

• Inspect lenses and housing for damage.

2. Battery installation and start-up

1. Unscrew the battery cover counterclockwise.

2. Remove the insulating tape from the battery.

3. Insert the battery with the + pole facing inwards .

4. Tighten the cover and press Power for 3 seconds to turn on.

5. The PARD logo appears on the screen.

Note: Use only one 18650 Li-ion battery. Avoid heat, fire and moisture.

3. Assembly

• Use the included Picatinny mount and screw it onto the underside of the device.

• Adjust for correct eye relief and centering in the sight.

4. Focusing

• Adjust the diopter ring until text and symbols are sharp.

• Then use the focus ring on the lens for clear viewing of targets.

5. E-compass calibration

Move the device in a “figure 8” motion until calibration is complete.

6. Zeroing

1. Set up a target board at the desired distance.

2. Press [Key 4] to open the menu, select Zeroing .

3. Shoot and adjust the X/Y axis so that the crosshairs hit the shot point.

4. Save the profile (A–E) and confirm with “Save: Y”.

Operation

Keys and shortcuts

User interface

• Battery level

• IR brightness

• Zoom

• Gyroscope

• E-compass

• WiFi status

Functions (selection)

1. Ballistic Calculator
   Calculates bullet trajectory, based on bullet weight, speed, temperature, altitude and aiming height.
   Save up to 5 profiles (A–E).
   Activated via the menu or automatically with LRF.

2. Range Unit Selection – select meters or yards.

3. Reticle Adjustment – ​​adjust X/Y and choose color and style (6 types).

4. Gyroscope – shows tilt and pitch; can be calibrated.

5. Display Brightness – 0–6 levels.

6. IR Brightness – 3 levels.

7. Auto Power Off – 1, 10 or 30 minutes.

8. Loop Recording – continuous video (3–10 min).

9. Recoil-activated Recording – automatically records 20 seconds per shot.

10. Record Audio – turn audio recording on/off.

11. WiFi – connect via PardVision (code: 12345678).

12. Date/Time & Language – adjust as needed.

13. Format SD – erase all content on the card.

14. PIP (Picture in Picture) – displays 2× magnification in the top center.

WiFi connection

1. Download PardVision from the App Store / Google Play.

2. Enable WiFi on the device and your phone.

3. Find the network “PARD_xxxxxx” and use the password 12345678 .

4. Open the app for live viewing and file transfer.

Maintenance

• Store in a dry, ventilated environment.

• Use lens cap during transport.

• Clean lenses with a microfiber cloth.

• Avoid moisture and extreme temperatures.

• Use only original chargers and cables.

FCC warning

This device complies with FCC Part 15 and may not cause harmful interference.
Unauthorized changes may result in loss of right of use.

Translated and quality assured by Nieload